MB-86 Casement
The MB-86 Casement outward opening window system with a thermal break forms a part of the MB-86 system designed to execute elements of architectural external development, e.g. different types of fixed and outward-opening windows, porch enclosures, shop windows and spatial structures featuring high thermal and sound insulation performance, as well as tightness to water and air infiltration.
The system meets all the requirements in respect of energy efficiency and environmental protection.
The parameters of windows based on the MB-86 Casement system exceed the most stringent applicable regulations and standards.
- Uf from 0.67 W/(m2K)
Thermal insulation of profiles
- E1950 Pa, EN 12208
Watertightness of windows
- class 4, EN 12207
Air permeability
- class C5, EN 12210
Wind load resistance: windows
Features and Design
- The constructional depth of window profiles equals: 77 mm (window frame), 86 mm (sash). Such depths of sash and frame profiles give the effect of unbroken surface seen from the inside after closing.
- The profiles used in the system feature three-chamber construction, the core of which is an insulating chamber placed between thermal spacers 43 and 42 mm wide.
- The system makes it possible to achieve high thermal insulation thanks to the use of EPS insulating inserts,
which are placed in the central chamber of the composite section. - High tightness to water penetration and air infiltration, as well as excellent thermal insulation performance have been possible to achieve due to the special shape of 2-component central gasket (with cellular insulating part) as well as glazing and closing gaskets.
- Most gaskets (e.g. glazing and external closing gaskets) are fitted as continuous stripping, without any corner trimming. The ends of gaskets are joined in mid-length of the top rail of the window frame. The central gasket is trimmed at the angle of 45º and glued in the corners or trimmed at the angle of 90º and glued to a rubber corner. The central gasket is also available in the form of a vulcanised frame. Such manner of gasket fitting guarantees very high tightness to water penetration and air infiltration.
- Possible glazing ranges: window frame – from 13 mm to 61 mm, window sash – from 22 mm to 70 mm. Such a wide glazing range allows for the installation of all available on the market types of single-chamber, two-chamber, sound proof or burglar-proof glass panels.
- Application of standard Euro grooves makes it possible to accommodate most hardware types available on the market, intended for aluminium and plastic outward opening windows. Profiles without grooves in the frame are used in the case of scissor hardware.
- Scissor hardware (not visible) or tradition rotating hinges (visible) may be applied in the windows of this system.
- Drainage of profiles may be either concealed or may come with a decorative cap.
- Compound profiles may be subjected to the process of powder coating or anodic oxidation.
- Profile connections are executed, just as in the case of MB-86, with minimum working with the use of applied corner cleats and supplementary accessories.
- The technology of fabrication of the construction is simplified as much as possible, hence high time efficiency is achieved in window fabrication
- The MB-86 Casement system is compatible with other systems manufactured by Aluprof, especially with the MB-86 system. That is why a great number of elements may be applied in more than one system, e.g. glazing strips, gaskets, hardware and most accessories.
MB-86_Casement
MB-86 Casement
MB-86 Casement
MB-86 Casement
Profile Cross-Section Drawings
• High thermal performance and high profile strength
• 3-chambered
• Opening outwards
• Construction depth: 77 mm
• Depth of frame (window / door): 77 mm / 77 mm
• Depth of leaf (window / door): 86 mm / 77 mm
• Construction solutions: side and top hung
• Max. size (H×W) (window / door): H to 2500 mm, L to 2400 mm / H to 2800 mm, L to 1400 mm
• 3-chambered
• Opening outwards
• Construction depth: 77 mm
• Depth of frame (window / door): 77 mm / 77 mm
• Depth of leaf (window / door): 86 mm / 77 mm
• Construction solutions: side and top hung
• Max. size (H×W) (window / door): H to 2500 mm, L to 2400 mm / H to 2800 mm, L to 1400 mm
Aluprof window profiles have a remarkably extensive range of colours to choose from, rich colour options that enable a perfect match, if not sympathetic accompaniment with both the internal & external elements of a building facade. Wooden grain effect coatings, of different wood types, are also available. Aluprof offers RAL colour chart and ADEC woodgrain coatings.
ADEC wood-effect colours
RAL chart
ADEC wood-effect colours
RAL chart
Elite Aluminium Window Systems t/a Aluwindows.ie
Old Dublin Road
Enniscorthy
Co.Wexford, Y21 VP99
Bank account: AIB Gorey
IBAN: IE71 AIBK 9336 4325 3761 82
BIC: AIBKIE2D
VAT reg: IE3772485QH
Copyright © Elite Aluminium Window Systems Ltd./ All rights reserved
Terms & Conditions / Privacy Policy / FAQ's
Window Door Systems
MB-86 Casement • Thermally Insulated • Outward Opening Window
MB-86 Casement
The MB-86 Casement outward opening window system with a thermal break forms a part of the MB-86 system designed to execute elements of architectural external development, e.g. different types of fixed and outward-opening windows, porch enclosures, shop windows and spatial structures featuring high thermal and sound insulation performance, as well as tightness to water and air infiltration.
The system meets all the requirements in respect of energy efficiency and environmental protection.
The parameters of windows based on the MB-86 Casement system exceed the most stringent applicable regulations and standards.
- Uf from 0.67 W/(m2K)
Thermal insulation of profiles
- E1950 Pa, EN 12208
Watertightness of windows
- class 4, EN 12207
Air permeability
- class C5, EN 12210
Wind load resistance: windows
Features and Design
- The constructional depth of window profiles equals: 77 mm (window frame), 86 mm (sash). Such depths of sash and frame profiles give the effect of unbroken surface seen from the inside after closing.
- The profiles used in the system feature three-chamber construction, the core of which is an insulating chamber placed between thermal spacers 43 and 42 mm wide.
- The system makes it possible to achieve high thermal insulation thanks to the use of EPS insulating inserts,
which are placed in the central chamber of the composite section. - High tightness to water penetration and air infiltration, as well as excellent thermal insulation performance have been possible to achieve due to the special shape of 2-component central gasket (with cellular insulating part) as well as glazing and closing gaskets.
- Most gaskets (e.g. glazing and external closing gaskets) are fitted as continuous stripping, without any corner trimming. The ends of gaskets are joined in mid-length of the top rail of the window frame. The central gasket is trimmed at the angle of 45º and glued in the corners or trimmed at the angle of 90º and glued to a rubber corner. The central gasket is also available in the form of a vulcanised frame. Such manner of gasket fitting guarantees very high tightness to water penetration and air infiltration.
- Possible glazing ranges: window frame – from 13 mm to 61 mm, window sash – from 22 mm to 70 mm. Such a wide glazing range allows for the installation of all available on the market types of single-chamber, two-chamber, sound proof or burglar-proof glass panels.
- Application of standard Euro grooves makes it possible to accommodate most hardware types available on the market, intended for aluminium and plastic outward opening windows. Profiles without grooves in the frame are used in the case of scissor hardware.
- Scissor hardware (not visible) or tradition rotating hinges (visible) may be applied in the windows of this system.
- Drainage of profiles may be either concealed or may come with a decorative cap.
- Compound profiles may be subjected to the process of powder coating or anodic oxidation.
- Profile connections are executed, just as in the case of MB-86, with minimum working with the use of applied corner cleats and supplementary accessories.
- The technology of fabrication of the construction is simplified as much as possible, hence high time efficiency is achieved in window fabrication
- The MB-86 Casement system is compatible with other systems manufactured by Aluprof, especially with the MB-86 system. That is why a great number of elements may be applied in more than one system, e.g. glazing strips, gaskets, hardware and most accessories.
MB-86_Casement
MB-86 Casement
MB-86 Casement
MB-86 Casement
Profile Cross-Section Drawings
• High thermal performance and high profile strength
• 3-chambered
• Opening outwards
• Construction depth: 77 mm
• Depth of frame (window / door): 77 mm / 77 mm
• Depth of leaf (window / door): 86 mm / 77 mm
• Construction solutions: side and top hung
• Max. size (H×W) (window / door): H to 2500 mm, L to 2400 mm / H to 2800 mm, L to 1400 mm
• 3-chambered
• Opening outwards
• Construction depth: 77 mm
• Depth of frame (window / door): 77 mm / 77 mm
• Depth of leaf (window / door): 86 mm / 77 mm
• Construction solutions: side and top hung
• Max. size (H×W) (window / door): H to 2500 mm, L to 2400 mm / H to 2800 mm, L to 1400 mm
Aluprof window profiles have a remarkably extensive range of colours to choose from, rich colour options that enable a perfect match, if not sympathetic accompaniment with both the internal & external elements of a building facade. Wooden grain effect coatings, of different wood types, are also available. Aluprof offers RAL colour chart and ADEC woodgrain coatings.
ADEC wood-effect colours
RAL chart
ADEC wood-effect colours
RAL chart